Journal Entry #0044
2025-12-05, Anthony Remark, Marian Scientific, AMDG
Here is an isometric view of 03009 MM1 Minute Hand with a 'cutoff' from the front panel.
The purpose is to show that the Gears are fastened and secure rather than not.
In the Cross Sectional view, we can see that the Driver gear (minute gear) is secured onto the shaft of the Encoder.
The Encoder is secured in place on the Anchor panel. The Front panel has a hole that allows the Minute hand and the hour hand will be visible and freely move
while the gear mechanism is hidden.
The Encoder is hot glued to the Anchor Panel.
Behind the Front Panel, We can see more of the configuration of the Gears. The Second gear that's driven is secured to the 3rd Gear and both
are freely rotating on a 1/4 inch dowel. This dowel is planned to be hot glued to the front panel, or the anchor panel.
From the left Side of the Isometric view, it's more clear that the Dowel will have a 'cap' configuration to prevent the Gears from
wandering out of place.
